Reference: W.H_FW-09.01-L400
70 / 400 mm trapezoidal bridge - EPDM
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The best way to install panels on a trapezoidal tin roof is to use our trapezoidal bridges. The bridges are lined with EPDM tape which creates an insulating layer between the roof and the element itself. This tape provides insulation where the screws and the roof are attached. On the bridges we mount solar panels using end clamps and middle clamps. The principle of mounting such clamps is simplified as much as possible by using sliding grooves with a ball or square nut. These nuts are inserted into the profile of the bridge and positioned in the right place for us, then the end or middle clamps are added and tightened with a screw. The height of the clamp must match the thickness of the solar panel.
The height of the trapezoidal bridge is the most optimal, allowing proper airflow between panels. In addition, the middle clamps separate our panels, securing them during operation.
Reference: M.H_WKRET SM M6X25
Size: 6.0x25 + 16mm / A2 EPDM washer
Reference: W.H_FW-09.01-L300
Bridge length: 300 mm Bridge height: 70 mm Bridge width: 114 mm EPDM tape
Reference: W.H_FW-25.01-L330
Bridge length: 330 mm Bridge height: 100 mm Bridge width: 119 mm EPDM tape Aluminium
Reference: M.H_SRUB MA M10X25
Diameter M10 Length: 25 mm Material: Stainless steel A2 (1.4301) Standard: DIN 933
Reference: M.H_SRUB MŁ M10X20
These screws can be used to connect profiles as well as to assemble panels with end and middle clamps. Material: stainless steel Height [mm]: 35 Diameter [mm]: 10 Thread length [mm]: 20 Head dimensions [mm]: 10x23x5
Reference: M.H_UCHW DB255
"Flat bar 30x5mm 1: 4016 cold-formed Type L